RJ Tech DACH Online Store
  • Germany
  • Netherlands
  • Switzerland
  • Austria
  • Norway
  • Finland

RESOURCES & SUPPORT

Support continues after selection.

Product usage and development resources are linked to RJ Support; original manufacturer specifications, drivers and development documents are organized by brand and model.

RJ SUPPORT

Already own the device? Go straight to product support.

Find operation, maintenance, protocol and development resources for Luchs A, Luchs B and Steinadler Pro. Select the files that match your actual hardware and software version.

Open RJ Support ↗

Opens the separate support platform in a new window.

01

Getting started with RDK development

Choose the model and memory, prepare power, storage and cooling, then install the system image following the corresponding official guide.

Select RDK
02

Sensor integration

Check the interfaces, drivers and power supply of cameras, LiDAR and positioning devices. Connect one device at a time first, then handle synchronization and calibration.

View LiDAR
03

System configuration

Start from the task, payload, power supply and control interface, and list the required components, optional components and mounting conditions item by item.

Choose a solution

Find resources by brand

RJ Tech Limited

D-Robotics

RDK X5 PoE Module official data sheet

From the public PDF: X5 only, IEEE 802.3af/at, 40-pin, onboard fan and heatsink. Upstream PSE and power budget must still be checked per device; the limits of different output ports cannot simply be added up to give total power capacity.

Data sheet ↗

RDK Stereo Camera GS130W product manual

Gives the exact model, dual MIPI interfaces and supported hosts; S100/S100P need the Camera expansion board. S600 is listed as supported, but the specific system version or end-to-end validation cannot be inferred from this table.

Official manual ↗

Getting started with GS130W official software

Requires the latest RDK OS/TROS and lists the hobot_mipi_cam example; there is no fixed per-host system/driver version matrix, so the version shown in the example output cannot be taken as the validated version for every host.

Drivers and examples ↗

GS130WI installation and IMU timestamp interface

Two 22-pin same-side-contact FFC/FPC cables; a 3-pin 1.25mm slim-to-Dupont cable carries the IMU timestamp. Whether it is wired, and the pin order, depend on the software requirements; it is not a mandatory purchase.

View product information ↗

RDK Audio Kit software version and patch requirements

I2S examples require X5 RDK OS 3.5.0, S100/P 4.0.5-20260507 and S600 5.1.0 respectively, plus the corresponding patches and configuration; the version number alone does not confirm the patch is installed. USB mode uses UAC; the selected mode and system still need to be recorded.

View product information ↗

RDK S100 MCU Port Expansion Board manual

S100 series only; 5 CAN FD, 30-pin, RJ45 and BMI088. The document describes a matching FPC, which does not commit this platform to selling it as a package; the IMU function in V4.0.2 described there is not yet implemented and should not be assumed to work in later versions.

Official manual ↗

RDK S600 Camera Expansion Board V1P0 manual

S600 only, 8 GMSL2; 2×MAX96712. The power table says external power is needed above 2.4A, while the body text and notes say above 2A; the threshold remains unconfirmed and must be checked. 12V, 550mA per channel and the DC plug (5.5 outer / 2.5mm inner diameter) each have a clear source.

Official manual ↗

SENSING

Fixposition

DEEP Robotics

TerraAgent Robotics(TAR)

Hesai

MindPalace

Odin ROS driver (requires manufacturer account / access rights)

ROS driver repository referenced in the manual; anonymous access requires sign-in, and account or repository permissions must be requested from the manufacturer. Match by device, firmware and driver branch; this does not mean RDK compatibility has been verified.

Drivers and examples ↗

Ruixing

TZTEK

Need interface documentation for your version?

Share the model, hardware version and operating environment so we can find the right connection guide and technical support.

Contact RJ

Configuration and backup tools

Edit selection list

  1. 01 Review configuration Model, version and quantity
  2. 02 Describe your application Application, environment and goals
  3. 03 Save summary Copy or download for discussion

Not sent yet. Your list is stored in this browser. Copy or download it to share with RJ.

Edit the full configuration, product selection and project notes here, or restore and download a backup. View full selection list 。

Packages & individual products 0

Packages list their included, extra and customer-supplied items according to the configuration; individual products keep their own quantities.

Application & contact details

You can describe your project without selecting products. Contact details are optional and stay in this browser.