RJ Tech DACH Online Store
  • Germany
  • Netherlands
  • Switzerland
  • Austria
  • Norway
  • Finland

Hesai Hesai · LiDAR LiDAR

Hesai ATX Directional Long-Range LiDAR

LiDAR series for directional long-distance sensing. The page organizes parameters by specification version, making it easy to choose between computing interfaces, power supply, and installation conditions.

LiDAR
ATX_SV:200 m Ranging (10% reflectivity)
ATX_SV:120° × 18.3° field of view
ATX_SV:100BASE-T1 Data interface
Placeholder Hesai ATX series LiDAR appearance, AI transparent background finishing
Product illustration

Overview

  • ATX_SV: 120° horizontal orientation sensing
  • ATX_SV: 116 line with 200 m @10% reflectivity
  • Automotive Ethernet synchronization with gPTP
  • Hardware version and corresponding parameters are presented in groups

Typical tasks

  • vehicle forward sensing
  • UGV directional point cloud collection
  • Multi-sensor environment awareness

What to consider

  • First confirm the specific specification version, and then compare channels, ranging and power consumption.
  • Different Ethernet physical interfaces require matching access hardware.
  • For the front and rear layout, the field of view and installation occlusion need to be checked separately.

Specifications & Interfaces

Switches the displayed specifications only. Purchase and inquiry configurations are selected separately.

Key specifications
Ranging distance
Ranging range: ATX_SV: 1–200 m Nearest ranging/blind zone: 0.5 m
Conditions
  • 10% reflectivity
  • Manual instrument range 0.5–198 m
  • 10% reflectivity ranging capability 1–200 m is another caliber, unconditional guarantee if not combined
Field of view (FOV)
ATX_SV:H 120° / V 18.3°
Conditions
  • V -12.4°–+5.9°
Channels / Array
116 line
Angular resolution
Horizontal angular resolution: 0.08° @10 Hz Vertical angular resolution: ROI 0.1° / non-ROI about 0.2°
Point rate
1,740,000 points/s
Frame rate
10 Hz
Ranging accuracy
Measurement accuracy: ±5 cm Ranging repeatability: 3 cm (1σ)
Conditions
  • Typical value
Data interface
Data interface: 100BASE-T1, slave mode ATX_SV interface: 100BASE-T1
Conditions
  • A12-en-260910
Power supply
9–16 V DC
Dimensions & Weight
Size: 102 × 102 × 30 mm Weight: 355 g
Conditions
  • Width × Depth × Height
Operating environment
Temperature: −40–+85 °C Protection: IP6K7 / IP6K9K
Additional measured specifications
Additional measured specifications
echo mode
Single echo: Last / Strongest (default)
Laser safety level
Class 1;905 nm
Other power & installation specifications
Other power & installation specifications
Other power supply parameters
Rated/Typical power consumption: 10 W Peak and minimum power capabilities: 36 W
Conditions
  • Does not include connection box and other accessories
  • The manual requires the external power supply to provide at least 36 W
Other interfaces & features
Other interfaces & features
Point cloud data rate
64.6 / 71.7 Mbps
Conditions
  • Single echo average/peak
  • The total data rate including Ethernet overhead is 66.0/73.3 Mbps
Connectors and cables
Automotive Ethernet Connector + 4-pin TE Power Connector
Conditions
  • A12 manual
Synchronization
gPTP(802.1AS AUTOSAR)
System & software scope
HesaiLidar_ROS_2.0 official driver repository lists this model

Components & Accessories

Product & configuration scope

  • Selected specification versions of ATX
  • Corresponding interface conversion, wiring harness and installation accessories are selected from the list

Accessory selection

  • Model matching Ethernet access device
  • Power supplies, connectors and wiring harnesses
  • Oriented mounting surfaces and synchronization conditions

Included items, options, wiring harnesses and mounting hardware are confirmed according to the selected model and system configuration.

Software and usage support

  • Use the point cloud resolution configuration corresponding to the model and firmware.
  • Driver access, time synchronization and sensor calibration are checked separately.
  • The upper-layer application is configured according to the actual point cloud density and computing load.

Operating conditions

  • 100BASE-T1 requires matching vehicle Ethernet access hardware and cannot be directly assumed to be the same as the ordinary RJ45 network port.
  • Power consumption, power supply margin, size and driver configuration should use the same hardware version data.

Models and optional configurations

ATX_SV · Standard version

Press A12-en-260910 manual: 116 line, 200m@10%, 10W, 100BASE-T1. The 256 line/230m/8W indicators of the official series belong to another specification range, and the parameters are matched according to the specific material number when selecting.

Technical resources

When using these documents, please check the product model, hardware configuration and document version.

Learn about related components

Explore the compute, perception and mobile platforms used in related solutions; see each solution for compatibility conditions and options.

Configuration and backup tools

Edit selection list

  1. 01 Review configuration Model, version and quantity
  2. 02 Describe your application Application, environment and goals
  3. 03 Save summary Copy or download for discussion

Not sent yet. Your list is stored in this browser. Copy or download it to share with RJ.

Edit the full configuration, product selection and project notes here, or restore and download a backup. View full selection list 。

Packages & individual products 0

Packages list their included, extra and customer-supplied items according to the configuration; individual products keep their own quantities.

Application & contact details

You can describe your project without selecting products. Contact details are optional and stay in this browser.