D-Robotics RDK X5
- Hosts listed by the manufacturer
- D-Robotics RDK X5
D-Robotics · Positioning & Inertial measurement
The RDK official six-axis inertial measurement module based on BMI088 supports I2C/SPI connection; choose direct connection or jumper installation according to the motherboard.

Official RDK accessories
Supported hosts and connections are listed in the manufacturer's documentation.
| Sensor | BMI088 |
|---|---|
| Number of measuring axes | 6 axis (3 axis plus Speed + 3 axis angle Speed) |
| measurement range | plus Speed range and conditions: ±3 / 6 / 12 / 24 g
Angle Speed range and conditions: ±125 / 250 / 500 / 1000 / 2000 dps |
| sampling rate | Accelerometer: 12.5 / 25 / 50 / 100 / 200 / 400 / 800 / 1600 Hz; gyroscope: 100 / 200 / 400 / 1000 / 2000 Hz |
| Data interface | I2C / SPI |
| Applicable host | D-Robotics RDK X5 / D-Robotics RDK S100 / D-Robotics RDK S100P / D-Robotics RDK S600 |
| Power supply | 40-pin: PIN1/17 is 3V3, PIN2/4 is 5 V |
| Dimensions & Weight | core board 34.97 × 24.97 mm; carrier board 64.97 × 55.97 mm Conditions
|
| Noise and Bias Conditions | Accelerometer: 20 mg; gyroscope: 0.5 dps |
|---|
| Resolution | 16 bit |
|---|---|
| Connectors and cables | 40-pin host interface; 3 × 5 jumper selection I²C/SPI; 2 × 7 core board connection |
| System & software scope | rdk-imu-module-sdk:C / Python / ROS 2 Conditions
|
Included items, options, wiring harnesses and mounting hardware are confirmed according to the selected model and system configuration.
When using these documents, please check the product model, hardware configuration and document version.