RJ Tech DACH Online Store
  • Germany
  • Netherlands
  • Switzerland
  • Austria
  • Norway
  • Finland

Hesai Hesai · LiDAR LiDAR

Hesai FTX Near-Field Solid-State LiDAR

Wide-angle LiDAR series for near-field coverage of robots. The configuration is selected according to the field of view and distance measurement conditions, which is suitable for supplementing the sensing range around the car body.

LiDAR 2 configurations
180° version: 180°×140°; 140° version: 140°×105° field of view
180° version: 20m; 140° version: 30m Ranging (10% reflectivity)
<6 W Power consumption
Placeholder Hesai FTX series LiDAR appearance, AI transparent background finishing
Product illustration

Overview

  • 180° / 140° two field of view configurations
  • Pure solid-state near-field point cloud
  • Both configurations: 10 Hz; 492,000 points/s
  • Field of view, distance measurement, size and weight are bound according to configuration

Typical tasks

  • UGV near field blind filling
  • Robot lateral environment perception
  • Multi-radar coverage combination

What to consider

  • The ranging capabilities of the 140° and 180° configurations are compared separately.
  • First determine the near-field area that needs to be covered, and then arrange the installation location.
  • Check overlapping areas, time synchronization and calibration when paired with other LiDAR.

Specifications & Interfaces

Switches the displayed specifications only. Purchase and inquiry configurations are selected separately.

Key specifications
Ranging distance
FTX 180°:20 m FTX 140°:30 m
Conditions
  • 10% reflectivity
  • 10% reflectivity, manual
  • F07 manual: central sub-field, normal incidence, 100 klx, PoD>50%, FAR<1E-4
  • FTX 180° Manual ranging: 17 m
Field of view (FOV)
FTX 180°:H 180° / V 140° FTX 140°:H 140° / V 105°
Channels / Array
FTX 180°:216 H × 192 V FTX 140°:256 H × 192 V
Angular resolution
FTX 180°:0.62° FTX 140°:H 0.56° / V 0.56°
Point rate
Single echo point frequency: FTX 180°: 492,000 point/s FTX 140°: 492,000 point/s Double echo point frequency: FTX 180°: about 984,000 points/s
Frame rate
FTX 180°:10 Hz FTX 140°:10 Hz
Ranging accuracy
Measurement accuracy: FTX 180°: ±5 cm FTX 140°: ±5 cm Ranging repeatability: FTX 180°: 3 cm (1σ) FTX 140°: 3 cm (1σ)
Conditions
  • Typical value
  • Range repeatability of 3 cm (1σ) is specified separately
  • Manual Ranging precision
Data interface
FTX180 interface: 100BASE-T1 FTX140 interface: 100BASE-T1
Conditions
  • F07-en-261010
  • F04-en-261010
Power supply
FTX 180°:9–16 V DC FTX 140°:9–16 V DC
Dimensions & Weight
Size: FTX 180°: 60 × 38.7 × 55 mm FTX 140°: 60 × 32 × 55 mm Weight: FTX 180°: Approx. 180 g FTX 140°: Approximately 160 g
Conditions
  • Width × Depth × Height
Operating environment
Temperature: FTX 180°: −40–+85 °C FTX 140°: −40–+85 °C Protection: FTX 180°: IP6K9K FTX 140°: IP6K9K
Conditions
  • ambient air temperature
  • F04 manual for ambient air temperature range of final SOP product
Additional measured specifications
Additional measured specifications
echo mode
FTX 180°: supports single echo and dual echo FTX 140°: Single echo: First
Laser safety level
FTX 180°:Class 1;940 nm FTX 140°:Class 1;940 nm
Other power & installation specifications
Other power & installation specifications
Other power supply parameters
Rated / typical power consumption: FTX 180°: <6 W FTX 140°: <6 W Peak & minimum supply capacity: FTX180 Minimum supply capacity: 15 W FTX140 Minimum supply capacity: 15 W
Other interfaces & features
Other interfaces & features
Point cloud data rate
FTX 180°: Single echo is about 24.6 / Double echo is about 49.2 Mbps FTX 140°: approx. 24.6 Mbps
Conditions
  • Corresponds to F07 manual mode
  • Uniform light distribution pattern
Synchronization
FTX 180°:PTP(802.1AS AUTOSAR) FTX 140°:gPTP(802.1AS AUTOSAR)
Conditions
  • Clock accuracy ≤ 1 μs, lock-out drift ≤ 5 μs/s
System & software scope
HesaiLidar_ROS_2.0 official driver repository lists this model

Components & Accessories

Product & configuration scope

  • FTX for selected field of view configuration
  • Corresponding power supply, data connection and installation packages

Accessory selection

  • Model matching data access hardware
  • Connection cables, power supplies and protective mountings
  • Multi-sensor calibration conditions

Included items, options, wiring harnesses and mounting hardware are confirmed according to the selected model and system configuration.

Software and usage support

  • Use the driving parameters corresponding to the field of view configuration.
  • Which detection or navigation function the point cloud is used for is determined by the application software.
  • Re-evaluate coverage and external parameters after changing the field of view configuration.

Operating conditions

  • The 180° version specifies a 20 m range at 10% reflectivity; do not combine it with the 30 m figure of the 140° version.
  • The blinding effect also depends on the installation position, fuselage occlusion, ground reflection and fusion algorithm.

Models and optional configurations

FTX 180° · Wide angle near field

180°×140°, 20m@10% reflectivity, about 180g, 60×38.7×55mm. FTX180 is the abbreviation for this field of view configuration.

FTX 140° · Extended near field

140°×105°, 30m@10% reflectivity, about 160g, 60×32×55mm.

Technical resources

When using these documents, please check the product model, hardware configuration and document version.

Learn about related components

Explore the compute, perception and mobile platforms used in related solutions; see each solution for compatibility conditions and options.

Configuration and backup tools

Edit selection list

  1. 01 Review configuration Model, version and quantity
  2. 02 Describe your application Application, environment and goals
  3. 03 Save summary Copy or download for discussion

Not sent yet. Your list is stored in this browser. Copy or download it to share with RJ.

Edit the full configuration, product selection and project notes here, or restore and download a backup. View full selection list 。

Packages & individual products 0

Packages list their included, extra and customer-supplied items according to the configuration; individual products keep their own quantities.

Application & contact details

You can describe your project without selecting products. Contact details are optional and stay in this browser.